Cross-section (Menu - Build)

1. Option [Earthwork Sheet]
This command is to set up Earthwork Sheet. No setting it up, can not save earthworks.

- Earthwork Sheet Dwg : select the drawing file to insert into cross section
- Height of Text : edit the height of text to show earthwork.
- >> : copy earthwork item on the left side spreadsheet to earthwork item on the right side spreadsheet.
- << : remove the earthwork item at the current row in the right spreadsheet.
- Up : move up the current row in the right spreadsheet.
- Down : move down the current row in the right spreadsheet.
- Import : import the file to the right spreadsheet.
- export : export the right spreadsheet to file.
- Initialize : initialize the right spreadsheet.

- Earthwork : edit a earthwork item, even if haven't the item in the left spreadsheet.

- X : x-position from the point where earthwork sheet is inserted.

- Y : y-position from the point where earthwork sheet is inserted.

- Type : select the as following:

  · -- : no earthwork item. But show the value (for example station; design level and ground level) in cross-section.

  · Area : select the item as cutting or banking

  · Length[Total] : select the item as grass

  · Length[x] : select the item as even ground

- Layer : layer name of earthwork entities

2. Build All

 Calculate the earthwork and drawing point of cross-sections

3. Earthwork

 Calculate the earthwork of cross-sections

4. Cross-section Points

 Calculate the points of cross-sections

5. Delete Earthwork

 Delete the earthworks of stations selected in the tree control.

6. Delete Cross-section Points

 Delete the points of stations selected in the tree control

7. Preview Earthwork

 Automatically calculating the earthworks of the current station, show them.

8. Result Earthwork

 Show the earthwork report as the following figure.

9. Detail Cross-Section

- (1) : selecting the station, move to it.
- (2) : move to the first station
- (3) : move to the previous station
- (4) : move to the next station
- (5) : move to the last station
- (6) : if the cross-section is a 'block', show the message
- (7) : if check it, when move the station, show the cross-section.
- (8) : show the station itself and link-stations
- (9) : select the item of cross-section points.
  · Slope[L] : left slope's points

  · Slope[R] : right slope's points

  · Gutter[L] : elevation point of left gutter

  · Gutter[R] : elevation point of right gutter

  · Limit[L] : point of left ROW(right-of-way) 

  · Limit[R] : point of right ROW

- (10) : select the entity, which is (9), in current cross-section

- (11) : earthwork item of earthwork sheet manager

- (12) : value of earthwork

- (13) : select the entities on current drawing.

- (14) : Searching the cross-section, and move to it.

- (15) : show the stations which are 'block'

- (16) : reading entities in current drawing, get elevations of ground level and layers
- (17) : reading the ground level entity, copy to ripper rock, soft rock and hard rock by the depths of vertical GL and layers

- (18) : calculate earthworks automatically

- (19) : Save cross-section. If click it, save the block definition whose name is the station

- (20) : picking a pair of point in current drawing, draw a bench cut there.

- (21) : picking a point in current drawing, draw a slope there.

- (22) : draw the cross-section

- (23) : draw the earthwork table in current drawing

- (24) : erase block named station in current drawing.

- (25) : show the polygons which have the earthwork at current row in the earthwork spreadsheet.

- (26) : automatically, draw the bench cut at entity selected by user

- (27) : draw the bench cut at entity selected by user

- (28) : draw the slope at entities selected by user

- (29) : draw the earthwork table at location picked by user

- (30) : Save GL and Layers selected by user

- (31) : reverse vertices of polyline.